View previous topic :: View next topic |
Author |
Message |
DavidCbs
Joined: 02 Apr 2004 Posts: 17 Location: Suffolk, England
|
Posted: Thu Jun 16, 2005 5:17 pm Post subject: Numeric Up Down Component Issue |
|
|
Using Synopsis 1.1.8, in the numeric up down component properties I am unable to set 100 as the maximum value. 99 is ok, 101 is ok but not 100. If 100 is entered and updated the effect is that the value, the min value and the max value are all set to 0. _________________ DavidCbs |
|
Back to top |
|
|
CodeMorphis
Joined: 02 Dec 2003 Posts: 252
|
Posted: Fri Jun 17, 2005 2:40 pm Post subject: |
|
|
100 is the default maximum value so it looks like when you enter it again, it gets incorrectly reset to 0. There is range checking going on to ensure that the value and the minimum value do not exceed the maximum and so that is why they all get reset. Should be a simple fix.
In the meantime, you can get around this by dragging a new NumericUpDown component onto your form - it will have the default maximum value of 100.
Thanks for reporting this. |
|
Back to top |
|
|
CodeMorphis
Joined: 02 Dec 2003 Posts: 252
|
Posted: Fri Jun 17, 2005 4:29 pm Post subject: |
|
|
As anticipated, this was an easy matter to correct. It should be in the next update.
Thanks again. |
|
Back to top |
|
|
CodeMorphis
Joined: 02 Dec 2003 Posts: 252
|
Posted: Tue Jul 19, 2005 9:54 pm Post subject: |
|
|
This has been corrected in update 1.1.9 |
|
Back to top |
|
|
|